Job description - raw mill operator at Belcement CJSC

Workplace - equipped technical means an area where one or a group of workers perform a production operation or work. Organization of the workplace - equipping with means and objects of labor placed in a certain order.

To assess the technical level of jobs in the practice of NOT, the following indicators are used:

1. For workplaces with equipment: the performance of the equipment used; compliance of the equipment with the requirements applicable to product quality; use of technological features of the equipment; progressiveness of the applied technological process; technological equipment of the workplace.

2. For workplaces without equipment: justification for the use of manual labor; the technical level and quality of the tool used; provision of the performer with an instrument

3. For workplaces without equipment: justification for the use of manual labor; availability of the performer with a tool (completeness, technical condition, availability of the necessary reserve).

4. Organizational level of the workplace: rational planning; organizational equipment; the number and complexity of permanently assigned work, shifts, etc.

5. Working conditions and safety measures: compliance with sanitary and hygienic conditions regulatory requirements; the use of heavy physical labor; the presence of monotonous work; ensuring labor safety; provision of overalls and footwear in accordance with established standards.

Each workplace evaluated as follows:

* the workplace fully complies with the standard level;

* the workplace does not correspond to the level, but can be brought to the standard level;

ѕ the workplace does not meet and cannot be brought up to the normative level.

The operator of raw mills at CJSC "Beltsement" has the following duties:

Conducting the process of grinding raw materials under the guidance of a more highly qualified machinist in raw mills with a total capacity of up to 100 t / h - when working on solid raw materials and dry grinding; up to 200 t/h - when working on soft raw materials; up to 300 t / h - when working at the mills "Hydrofol" and "Aerofol".

Participation in the regulation of mill feeding and compliance with technological requirements for the quality of raw meal or sludge.

Ensuring the uninterrupted operation of feeders, batchers, transporting and classifying devices, mill heating.

Monitoring the condition of the housing, armored lining and sealing devices of mills, lubrication and cooling systems for bearings.

Participation in additional loading and reloading of mills.

Prevention and elimination of malfunctions in the operation of raw mills and associated equipment.

Also, the machinist of raw mills must know: the principle of operation and arrangement of grinding units and auxiliary equipment; factors affecting the operation of grinding units; basic properties and quality characteristics of raw meal and sludge components; grinding media sorting techniques; purpose and principle of operation of control and measuring devices, means of signaling, automation and blocking; ways to identify and eliminate malfunctions in the operation of mechanisms; lubrication maps, types and grades of lubricants.

To successfully perform his duties, the raw mill operator must have a high vocational training, high level responsibility, ability to work alone.

The positions of machinists of raw mills are completed by disciplined, executive servicemen after training in their specialty.

To master a specialty, you need an initial professional education and training in a training military unit.

During the period of service, the machinist of raw mills can improve his class qualification to the 1st class and can be appointed to the position of commander of the engineering and technical department.

Observation sheet

Individual photo of working time

CJSC "Beltsement" Full name - Tipichenko V.S.

Raw material shop Profession - machinist of raw mills

Rank - 5

Work experience - 4 years

Table 2.1.

Summary of same-name labor time costs

tp.zn=15 min.

trel = 8.4% of the operational time

trel = 2.4% of the operational time

TCM=480 min.

Nfact =32 products Nplan =35 products

1. Calculate the operational time according to the standard:

tOP \u003d (TSM-tpz) / k

k=1+(aobs+arel)/100=1+(9.3/100)=1.03

tOP=480-15/1.093=425 min.

tex =0.05*425=22 min.

Tob=0.043*425=18 min.

Let's make time balances based on the data:

Table 2.2.

Actual and project balance of working time

Let's calculate the indicators characterizing the use of working time:

1. Coefficient of use of working time:

2. The coefficient of loss of working time depending on the working

3. The coefficient of loss of working time, independent of the working

4. Coefficient of possible compaction of working time

Let us find a possible increase in labor productivity due to the elimination of all losses.

Calculate the rate of production

Let's calculate the time limit

Having considered all the results obtained, we can conclude what are the reasons for non-compliance with the norms and methods for their elimination.

The crane operator spent a lot of time on breaks related to the violation of discipline, and when revising his work balance and compiling the standard, this unused time was taken into account in operational time. As a result, the enterprise will improve time standards for more efficient work.

Shortcomings in the organization and maintenance of workplaces have been identified in the quality of receiving cargo and servicing the machine, but they are not significant and can be easily eliminated.

We bring to your attention a typical example of a job description for a coal and cement mill operator, a sample of 2019/2020. A person with primary or secondary vocational education, special training and work experience can be appointed to this position. Do not forget, each instruction of the operator of coal and cement mills is issued on hand against receipt.

It provides typical information about the knowledge that a coal and cement mill operator should have. About duties, rights and responsibilities.

This material is included in the huge library of our site, which is updated daily.

1. General Provisions

1. The driver of coal and cement mills belongs to the category of workers.

2. A person with secondary vocational education or primary vocational education and special training and work experience of ________ years is accepted for the position of a coal and cement mill driver.

3. The driver of coal and cement mills is hired and dismissed by the director of the organization on the proposal of ___________.

4. The driver of coal and cement mills must know:

a) special (professional) knowledge of the position:

- device and principle of operation of the serviced equipment; factors affecting the quality of grinding, the operation of coal mills, grinding units;

— technical conditions and mode of operation of units for drying, crushing and grinding coal;

– schedule of additional loading and reloading of mills with grinding media;

- the purpose and principle of operation of instrumentation, automatic control devices, alarm and blocking systems;

— quality characteristics of clinker and additives; basic techniques and methods for laboratory determination of cement quality;

— lubrication charts for serviced equipment;

- grades and properties of lubricants; ways to identify and eliminate malfunctions in the operation of mechanisms;

— state standards for cement;

b) general knowledge of the employee of the organization:

— rules and norms of labor protection, safety measures, industrial sanitation and fire protection,

- rules for the use of personal protective equipment;

- requirements for the quality of work (services) performed, for the rational organization of labor in the workplace;

- types of marriage and ways to prevent and eliminate it;

- production signaling.

5. In his activities, the operator of coal and cement mills is guided by:

- the legislation of the Russian Federation,

- the charter of the organization,

- orders and orders of the director of the organization,

- this job description,

- The internal labor regulations of the organization.

6. The driver of coal and cement mills reports directly to ___________ a worker with a higher qualification, the head of production (site, workshop) and the director of the organization

7. During the absence of the driver of coal and cement mills (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of _________ in in due course which acquires the corresponding rights, duties and is responsible for the fulfillment of the duties assigned to it.

2. Job responsibilities of a coal and cement mill operator

The job responsibilities of a coal and cement mill operator are:

a) Special (professional) duties:

— Conducting the process of grinding coal in coal mills with a capacity of up to 16 t/h, clinker in cement mills with a total capacity of up to 75 t/h under the guidance of a more highly qualified machinist.

— Control of the operation of feeders, dispensers, draft and classifying devices.

- Regulation of temperature and speed of the drying agent in accordance with the specified mode and grade of coal.

— Temperature control of coal and coal dust in bunkers, transport mechanisms and mills.

– Participation in additional loading and reloading of mills.

— Equipment sealing control.

— Participation in the regulation of mill supply and compliance with technological requirements for the quality of cement.

— Ensuring uninterrupted operation, good condition of serviced equipment.

— Temperature control of bearings, operation of oil stations, lubrication and water cooling systems.

— Control of the condition of the hull, armored lining and sealing devices of mills.

– Participation in additional loading and reloading of mills with grinding media.

— Prevention and elimination of malfunctions in the operation of serviced equipment.

b) General duties of an employee of the organization:

— Compliance with the Internal Labor Regulations and other local regulations of the organization, internal rules and norms of labor protection, safety, industrial sanitation and fire protection.

– Fulfillment, within the framework of the employment contract, of the orders of the employees to whom it was repaired in accordance with this instruction.

– Performing work on the acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning the workplace, fixtures, tools, as well as keeping them in good condition.

- Maintaining established technical documentation.

3. Rights of the driver of coal and cement mills

The operator of coal and cement mills has the right to:

1. Submit proposals for management consideration:

- to improve the work related to the duties provided for in this instruction,

— on bringing to material and disciplinary responsibility employees who violated production and labor discipline.

2. Request from structural divisions and employees of the organization the information necessary for him to perform his duties.

3. Get acquainted with the documents that define his rights and obligations in his position, the criteria for assessing the quality of performance of official duties.

4. Get acquainted with the draft decisions of the organization's management regarding its activities.

5. Require the management of the organization to provide assistance, including the provision of organizational and technical conditions and execution of the established documents necessary for the performance of official duties.

6. Other rights established by the current labor legislation.

4. Responsibility of the operator of coal and cement mills

The operator of coal and cement mills is responsible in the following cases:

1. For improper performance or non-performance of their official duties provided for by this job description - within the limits established by labor legislation Russian Federation.

2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.

3. For causing material damage to the organization - within the limits established by the current labor and civil legislation of the Russian Federation.

Job description for a coal and cement mill operator - sample 2019/2020. Duties of a coal and cement mill operator, rights of a coal and cement mill operator, responsibility of a coal and cement mill operator.

\Typical job description Machinist of coal and cement mills of the 3rd category

Job description of the Machinist of coal and cement mills of the 3rd category

Job title: Machinist of coal and cement mills of the 3rd category
Subdivision: _________________________

1. General Provisions:

Subordination:
• The driver of coal and cement mills of the 3rd category is directly subordinate to .............................
• The driver of coal and cement mills of the 3rd category follows instructions .............................................. .............

(instructions of these employees are carried out only if they do not contradict the instructions of the immediate supervisor).

Substitution:

• The driver of coal and cement mills of the 3rd category replaces .............................................. .........................................
• The driver of coal and cement mills of the 3rd category replaces .............................................. ...............................................

Recruitment and dismissal:
The driver of coal and cement mills is appointed to the position and dismissed by the head of the department in agreement with the head of the department.

Must know:

• device and principle of operation of the serviced equipment
• factors affecting the quality of grinding, the operation of coal mills, grinding units
• technical conditions and mode of operation of units for drying, crushing and grinding coal
• schedule of additional loading and reloading of mills with grinding media
• purpose and principle of operation of instrumentation, automatic control devices, alarm and blocking systems
• quality characteristics of clinker and additives
• basic techniques and methods for laboratory determination of cement quality
• serviced equipment lubrication charts
• grades and properties of lubricants
• ways to identify and eliminate malfunctions in the operation of mechanisms
• state standards for cement.

• Conducting the process of grinding coal in coal mills with a capacity of up to 16 t/h, clinker in cement mills with a total capacity of up to 75 t/h under the guidance of a more highly qualified machinist.
• Monitoring the operation of feeders, dispensers, draft and classifying devices.
• Regulation of temperature and speed of the drying agent in accordance with the given mode and grade of coal.
• Control of temperature of coal and coal dust in bunkers, transport mechanisms and mills.
• Participation in additional loading and reloading of mills.
• Equipment sealing control.
• Participation in the regulation of mill supply and compliance with technological requirements for the quality of cement.
• Ensuring uninterrupted operation, good condition of serviced equipment.
• Temperature control of bearings, operation of oil stations, lubrication and water cooling systems.
• Monitoring the condition of the hull, armored lining and sealing devices of mills.
• Participation in additional loading and reloading of mills with grinding media.
• Prevention and elimination of malfunctions in the operation of serviced equipment.

4. Rights

• The driver of coal and cement mills has the right to give instructions to employees subordinate to him, tasks on a range of issues that are part of his functional duties.
• The driver of coal and cement mills has the right to control the fulfillment of production tasks, the timely execution of individual orders by employees subordinate to him.
• The driver of coal and cement mills has the right to request and receive the necessary materials and documents related to the issues of his activities and the activities of employees subordinate to him.
• The driver of coal and cement mills has the right to interact with other services of the enterprise on production and other issues that are part of his functional duties.
• The operator of coal and cement mills has the right to get acquainted with the draft decisions of the management of the enterprise regarding the activities of the Division.
• The driver of coal and cement mills has the right to propose for consideration by the manager proposals for improving the work related to the duties provided for in this Job Description.
• The driver of coal and cement mills has the right to submit proposals for the consideration of the head of the proposal to encourage distinguished workers, to impose penalties on violators of production and labor discipline.
• The driver of coal and cement mills has the right to report to the manager about all identified violations and shortcomings in connection with the work performed.

• The driver of coal and cement mills is liable for improper performance or non-performance of his duties stipulated by this job description - to the extent determined by the labor legislation of the Russian Federation.
• The operator of coal and cement mills is responsible for violating the rules and regulations governing the activities of the enterprise.
• Upon transfer to another job or dismissal from office, the Coal and Cement Mills Operator is responsible for the proper and timely handover of cases to the person taking up this position, and in the absence of such, to the person replacing him or directly to his supervisor.
• The driver of coal and cement mills is liable for offenses committed in the course of his activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
• The driver of coal and cement mills is responsible for causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
• The operator of coal and cement mills is responsible for complying with applicable instructions, orders and orders to maintain trade secrets and confidential information.
• The operator of coal and cement mills is responsible for the implementation of internal regulations, safety and fire safety rules.

Head of structural